Shopping Cart

Sun Goddess Barefoot Anklet

Want to make this Design Idea? See products and other information below.

Supply List:

3 TierraCast Link Stepped Swarovski SS34 CRYSTAL AB - Antique Gold

3 TierraCast Link 7mm Nugget 2 Hole Bar - Gold Plated

9 inches Chain Rolo 7mm - Satin Hamilton Gold

24 inches Chain Rolo 3.5mm - Satin Hamilton Gold

5 inches Chain Rolo 2mm - Satin Hamilton Gold

1 TierraCast Clasp Lobster 15mm - Gold Plated

3 Jump Ring 10mm 14g - Satin Hamilton Gold Plated

17 Jump Ring 6mm 21g - Satin Hamilton Gold

3 Jump Ring 8mm 18g - Satin Hamilton Gold

Finished Length: 9 1/2 inches Time To Make: Under three hours Level of Difficulty: Intermediate Tools: Chain Nose Pliers, Flat Nose Pliers, Flush Cutters

Designer Tip: Cut the 6mm chain into a 5 inch (33 links) and a 3 inch (22 links) segment. Cut the 3.5mm chain into two 4 inch, two 3 5/8 inch, and two 2 7/8 inch segments, ensuring all these segments have an even number of links. Insert a 10mm jump ring through the 17th and 19th links of the longer 6mm chain segment so that in encircles the middle link. Attach a Swarovski link to the 10mm jump ring using 2 6mm jump rings; attach a 2-hole bar to the other end of the Swarovski link using a single 6mm jump ring. Attach another Swarovski link to the bar using 2 6mm jump rings and another bar to the second Swarovski link using a single 6mm ring. Repeat one more time. Open a 10mm jump ring and add the shorter 6mm chain segment, the right-hand side of the longer 6mm chain segment, and three 3.5mm chain segments from shortest to longest. Repeat on other side, omitting the shorter 6mm chain segment. Link the two shortest chain segments to the bottom of the first Swarovski link, using a 6mm chain segment on either side. Repeat for the medium and longest 3.5mm chain segments. Attach the clasp to the end of the shorter 6mm chain segment using two 6mm jump rings. Cut the 2mm chain in half. At this point you will need to try on the bracelet and adjust the size of the toe ring portion according to foot size. Open a 4mm jump ring and add both ends of the 2mm chain to the ring so that the ends of one chain length are both on the inside and the other two on the outside. Attach the 4mm jump ring to the last bar using 2 more 4mm jump rings.

Helpful Video Tutorial: Click here to Watch Jump Rings 101 Basic Techniques for Jewelry Making

To add items to your cart, fill in the desired quantity at the top or bottom of the page to add all selected items to your shopping cart.