Dappled Ellipse Necklace

Want to make this Design Idea?

You can quickly add all the required items by clicking the SELECT ALL button below, ENTERING required quantities like # of INCHES of Leather, UNCHECKING any unwanted items. Then go to bottom of page and click ADD TO CART.

Supply List:

1 37mm Textured Circles Pendant / Link - Satin Hamilton Gold

1 Claycult 12mm Leopard Round Ceramic Bead - Bronze

4 Claycult 8mm Leopard Round Ceramic Bead - Bronze

14 inches Chain Rolo Petite Double 2mm - Satin Hamilton Gold

1 Clasp Lobster 15mm - Satin Hamilton Gold

1 Head Pin 2 inch 20g - Satin Hamilton Gold

4 Eye Pin 2 inch 20g - Satin Hamilton Gold

1 Jump Ring 4mm 21g - Satin Hamilton Gold

1 Jump Ring 6mm 21g - Satin Hamilton Gold

Finished Length: 18 inches

Time To Finish: Under 1 Hour

Level of Difficulty: Beginner

Tools: Looping Pliers, Chain Nose Pliers, Flush Cutters

Helpful Video Tutorial: Click to Watch Simple Looping Techniques for Jewelry Making

Designer Tip: Cut the chain into a 3 inch, 2 3-link, a 5 inch, and a 6 inch segment. Thread an 8mm bead onto a head pin and the remaining beads onto eye pins; form a simple loop at the top of each. Attach the 3 inch segment onto the perpendicular link on the focal 1 1/8 inches from the end of the chain; attach the Claycult dangle to the horizontal link. Attach the following to the shorter side of the 3 inch chain segment: an 8mm Claycult link, a 3-link chain segment, another link, another chain segment, the last 8mm link, the 5 inch chain segment, the 4mm jump ring, and the clasp. Attach the following to the longer side of the center chain segment: the 12mm Claycult dangle, the 6 inch chain segment, and the 6mm jump ring.