Shopping Cart

21x14x4.5mm
Hole Size: 5x2mm
Sold Individually
Zinc plated with 99.9% Sterling Silver
Use 1 Length of 5mm FLAT Cord
This slide makes an adjustable bracelet - glue cord in one side and cut the other at an angle. The loose end is threaded through the slide buckle. You can paint or color the cut end of the cord to make it blend.
CLICK HERE FOR QTY DISCOUNT

FL-CL-161AS
L: 48mm
W: 19mm
H: 6.5mm
Hole Size: 10mm x 2.5mm
Use one continuous length of 5mm flat leather and create a loop around the arrow head. Clasp requires the purchase of a 10mm Flat Leather Slide Bar. Clasp requires approx. 4 additional inches of Flat Cord to accommodate loop
Sold Individually.
CLICK HERE FOR QTY DISCOUNT

Horseshoe: 27.5x24x6mm Square: 8x13x9mm
Hole size: 10x2mm
Sold Individually
Zinc plated with 99.9% sterling silver
Clasp requires extra inch of leather to accommodate loop.
Use 1 10mm FLAT leather or 2 Lengths of 5mm FLAT leather
Clasp adds about 1 inch
The leather passes through the square piece once, then doubles back and glues in to the other hole to form a loop.
This loop then hooks on to the U-shape to close the bracelet.
CLICK HERE FOR QTY DISCOUNT

56x38mm
Hole size: 10x2mm
Sold Individually
Zinc plated with 99.9% sterling silver
Use with one looped piece of 5mm flat leather and 10mm flat sliders. Please see sample.
This bracelet works best for small wrists. The cuff shape is a little smaller than the average wrist, and you will want to size the leather accordingly. Trying to add more leather to make a wider bracelet will not work.
Clasp requires approx. 4 additional inches of Flat Cord to accommodate loop

CLICK HERE FOR QTY DISCOUNT

33x10x12mm
Hole Size: 10x2mm
Sold as a set
Zinc plated with brass
Use with 1 10mm Flat Leather or 2 Lengths of 5mm Flat
CLICK HERE FOR QTY DISCOUNT

24x20x6.5mm
Hole Size: 17mm x 2mm; Beading Holes: 8 x 1mm - NOT for Leather.
Sold Individually
Zinc plated with 99.9% Sterling Silver
Use Stringing Wire to string beads and crimp to Claspholes
Underside has 8 1mm holes for beading wire. Not recommended for beginners.

24x18 (PLUS 6 Pin Loop with 2 Hole Size)x8 mm Hole Size: Multi
Sold Individually
CLICK HERE FOR QTY DISCOUNT

27x25x7mm
Hole size: 20x2.5mm
Sold Individually
Zinc plated with copper
Use 2 lengths of 10mm FLAT leather or 4 Lengths of 5mm FLAT leather
OrUse 1 length of 10mm and 2 lengths of 5mm FLAT leather
Clasp adds about 1 inch
Ends must be glued with a super glue designed for leather and metal

CLICK HERE FOR QTY DISCOUNT

22.5x13x7mm
Hole Size: 10x2mm
Sold Individually
Zinc plated with Copper
Use 1 10mm FLAT leather or 2 Lengths of 5mm FLAT leather
Ends must be glued with a super glue designed for leather and metal
Simple magnet with a subtle mesh print.

CLICK HERE FOR QTY DISCOUNT

22x52x7mm
Hole Size: 49x2mm
Sold Individually
Zinc plated with Copper
Use 10 Lengths of 5mm or 5 Lengths of 10mm FLAT Cord or a mix of sizes
Ends must be glued with a super glue designed for leather and metal.
CLICK HERE FOR QTY DISCOUNT

17x7x4mm
Hole Size: 5x2mm
Sold Individually
Zinc plated with Copper
Use 1 Length of 5mm FLAT Cord
Ends must be glued with a super glue designed for leather and metal.
This clasp has a tight fit, you may need to compress cord before inserting it. Lightly squeeze the leather with a pair of flat pliers, or snip the corners.
CLICK HERE FOR QTY DISCOUNT

8.5x13x5mm
Sold INDIVIDUALLY
Zinc plated with Copper
CLICK HERE FOR QTY DISCOUNT

Length: 25mm
Width: 12mm
Height: 7mm
Hole size: 5mm x 2.2mm, 1.5mm round
Sold Individually
Material: Zinc plated with 99.9% sterling silver
Origin: European Union
Free of lead, nickel, cadmium. Hypoallergenic.

This magnet features a hole for gluing 5mm leather, plus a separate hole for threading a headpin through (there are insets in the metal to close securely around the headpin). You can use this to securely and cleanly add chain, beads, or another cording next to the leather for a mixed-media bracelet. If you have a very thin glue tip you can use 0.5 mm leather to glue in the small opening.
CLICK HERE FOR QTY DISCOUNT